Chlorinated Polyethylene CPE Y/M Used for Plastic and Rubber Modifier

• Customization: Available
• CAS No.: 63231-66-3
• Formula: -CH 2-Chcl-CH 2-CH 2-
• Model NO.: CPE-Y/M
• EINECS: No
• Certification: ISO9001
• Environmental Protection: Yes
• Color: White
• Kind: Plasticizer
• Appearance: Powder
• Transport Package: 25kg/Bag
• Specification: 25kg/bag
• Trademark: AXA
• Origin: China
• HS Code: 390190900
• Production Capacity: 3000 Mt a Month

Product Description

Product Description

CPE-Y/M is a new PVC modifier independently developed by the company. Compared with ordinary CPE, it can improve the hardness and toughness of PVC products at the same time. While ensuring good toughness of PVC, it gives products higher tensile strength and toughness. hardness.

Products Features

CPE-Y product advantages: 
1. Promote the plasticization of PVC mixture ;
2. Good elongation at break and toughness ; 
3. Improve the surface finish of the final product ;
4. Gives PVC products excellent strength and hardness, and significantly improves the compressive strength of the line pipe. 
CPE-M product advantages: 
1. Low consumption, 75% - 80% of pure material CPE; 
2. Obviously improve the toughness of the product; 
3. Promote the plasticization of PVC mixture; 
4. Excellent elongation at break and toughness; 
5. Improve the cost performance ratio of products.

Technical Indicators

parameter	measurement	Test standard	CPE-Y	CPE-M
Product appearance	--	--	White powder	White powder
Apparent density	g/cm3	GB/T 1636	0.5±0.1	≥0.30
Sieve residue (30 mesh)	%	GB/T 2916	≤2.0	≤2.0
Volatile matter	%	ASTM D5668	≤1.5	≤1.5
Residual (750 oC)	%	GB/T 7531	5.5±1.0	≤6.0
tensile strength	MPa	GB/T 528	6.0±2.0	≥4.0
elongation at break	%	GB/T 528	1100±100	≥1600
Hardness Shore A	--	GB/T 2411	62±3	--

Product application

1, CPE-Y is applicable to PVC hard products and molded products. It is almost crystal free and has excellent flame retardancy, electrical insulation, chemical resistance, oil resistance and water resistance; It has good compatibility with PVC, CR, NBR, etc. 
2, CPE-M is applicable to flame retardant of ABS products, wire and electric appliance shells, soft PVC foaming materials, special synthetic rubber, modifier of general synthetic rubber, plasticizer of PVC and other plastics

packaging and storage

25Kg/package or as required by customers. 
The product should be kept clean during transportation and handling, prevent sunshine, rain, high temperature and humidity, and avoid damage to packaging. It should be stored in a cool, dry, sunless warehouse with temperature below 40 C for two year. It can still be used after two year' performance test.