| Customization: | Available |
|---|---|
| CAS No.: | 64754-90-1 |
| Formula: | [CH2-Chcl-CH2-CH2]N |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
AXA CPE-135B is a thermoplastic elastomer material made of chlorinated high-density polyethylene. This strain is an irregular structure and thermoplastic elastomer, almost completely free of crystals, with excellent flame retardancy, electrical insulation, chemical resistance, oil resistance and water resistance. Good compatibility with PVC, CR, NBR, etc. It can be used as a flame retardant for ABS products, housings for electric wires and electrical appliances, and soft PVC foaming materials. It can also be used as a special synthetic rubber, as a modifier for general synthetic rubber and as a plasticizer for plastics such as PVC.
1. Excellent elongation at break
2. Excellent flame retardant performance
3. Excellent powder fluidity
4. Excellent electrical insulation performance
| parameter | unit | Testing Standard | CPE-135B |
| Appearance | - | visual inspection | White powder |
| Chlorine content | % | - | 35±2 |
| Apparent density | g/cm3 | GB/T1636-2008 | 0.50±0.10 |
| Sieve residue (0.9mm sieve hole) | % | RK/PG-05-001 | ≤0.2 |
| Volatile matter | % | RK/PG-05-003 | ≤0.4 |
| Residue (750°C) | % | GB/T 9345-2008 | ≤5.0 |
| Tensile Strength | MPa | GB/T 528-2009 | 6-11 |
| elongation at break | % | GB/T 528-2009 | 600-1600 |
| Hardness Shore A | - | GB/T 531-2008 | ≤65 |
| Mooney viscosity | ML(1+4)125ºC | - | 45-95 |
CPE135B is mainly used for the manufacture of various vulcanized rubber products and non-vulcanized rubber products, especially for the manufacture of heat-resistant, weather-resistant, oil-resistant cables, hose, seals, etc. By adding crosslinking agents and other additives, you can manufacture a variety of flame retardant wire and cable sheath, seal, flame retardant transport belt, automotive hose, triangle belt and so on.
1. 25kg polypropylene packaging bags, or customized packaging according to customer requirements.
2. During the transportation and loading and unloading of products, it should be kept clean to prevent sun and rain, high temperature and humidity, and avoid damage to the packaging. The products should be stored in a cool, dry, no direct sunlight, temperature below 40 °C warehouse, storage period of two years, the products can still be useful if the performance test qualified two years later.
){kind=link}