| Customization: | Available |
|---|---|
| CAS No.: | 64754-90-1 |
| Formula: | [CH2-Chcl-CH2-CH2]N |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
CPE-135AZ is a rubber-type chlorinated polyethylene, which has good impact resistance, flame retardancy, heat resistance and weather resistance; it can be widely used in ABS modification, etc. In addition, the fluidity of 135AZ is also the best, which can improve the problems of poor product fluidity, poor plasticization and poor processing performance.
1.Excellent processing performance
2.Good mechanical properties at low temperature
3.Higher impact resistance
4.Better high temperature resistance
| Index | Unit | Testing Standard | CPE-135AZ |
| Exterior | -- | -- | White powder |
| Chlorine content | % | GB/T 7139 | 35.0±2.0 |
| Apparent density | g/cm3 | GB/T 1636-2008 | 0.50±0.10 |
| 30 mesh sieve residue | % | GB/T 2916 | ≤2.0 |
| Volatile matter | % | ASTM D5668 | ≤0.4 |
| Mooney viscosity | ML125ºC 1+4 | GB/T 1232.1-2000 | 35-45 |
| elongation at break | % | GB/T 528-2009 | ≥800 |
| Tensile Strength | MPa | GB/T 528-2009 | >8 |
| Shore hardness | ShoreA | GB/T 2411-2008 | ≤65 |
Product Performance Test
| Recipe | Recipe1 | Recipe2 | Recipe3 |
| ABS | 100 | 100 | 100 |
| CPE-135C | / | 10 | 15 |
| Test indicators | Normal temperature impact strength | Low temperature impact strength | ||
| Specification | 1mmgap | 2mm injection molding | 1mm gap | 2mm injection molding |
| Recipe 1 | 19.82±0.68 | 24.88±2.92 | 12.88±0.76 | 16.50±1.07 |
| recipe 2 | 29.64±1.79 | 32.95±1.21 | 15.08±0.97 | 26.33±3.47 |
| Recipe 3 | 32.04±0.38 | 34.75±1.73 | 25.47±2.19 | 29.33±2.50 |
CPE-135AZ has excellent processing properties and good mechanical properties at low temperature, and can be used for ABS modification, etc.
This product is sealed in plastic bags and then externally packaged in polypropylene bags, each weighing 25±0.1kg.
Storage and Transportation
This product is stored in a dry and ventilated warehouse to prevent exposure to sunlight and moisture. Prevent pollution, sun exposure, rain and heat during transportation. This product is not a hazardous material.
){kind=link}