Acrylic Processing Aid ACR401 Used for PVC Pipe

• Customization: Available
• Feature: Oxidative Degradable
• CAS No.: 25133-97-5
• Model NO.: KF101
• Formula: (C5h8o2.C5h8o2.C4h6o2)X
• Material: Polyvinyl Chloride/PVC
• Plastic Properties After Heated: Thermoplastic Plastics
• Plastic Forming Method: Casting Plastic
• Color: White
• Company Proper: Manufacturer
• Mode of Transport: Sea Transportation
• Product Color: White Powder
• Model No.: Kf101
• Transport Package: 25kg Woven Bag
• Specification: 25kg/Bag
• Trademark: AXA
• Origin: China
• HS Code: 39069090
• Production Capacity: 3000 Mt a Month

Product Description

Product Introduction

In addition to possessing all the basic characteristics of PVC processing aids, foaming regulators also have higher molecular weight, higher melt strength, and can make the pore structure of the product more uniform and lower density than general processing aids. By increasing the pressure and torque of PVC melt, the cohesion and uniformity of PVC melt can be effectively enhanced, preventing the merging of bubbles and obtaining uniform foamed products.

product advantages

1. ACR processing aids can promote the melting of PVC, improve the surface finish, improve the elasticity of the melt, and enhance the elongation and strength of the melt.
2. It is beneficial to cover the bubbles and prevent the collapse of the cells. The molecular weight and dosage of the foam regulator have a great influence on the density of the foam sheet: with the increase of the molecular weight, the melt strength of PVC increases, and the density of the foam sheet can be made lower, and the increase of the dosage of the regulator have the same effect. But this effect does not have a linear relationship. Continue to increase the molecular weight or increase the dosage, the effect on reducing the density is not very obvious, and the density will tend to be constant.

3. Ultra-high molecular weight and super-strong melt strength endow products with lower density and uniform cell structure, especially suitable for PVC foamed thick board products.
4. Give the product a uniform cell structure, high molecular weight and high melt strength, lower product density, and excellent processing performance.
5. Good plasticizing ability, excellent melt fluidity, and good compatibility with PVC products, making the product more stable in size.
6.Excellent plasticizing performance, endowing the product with excellent processing performance and excellent surface gloss.

 

Technical Indicators

product name	KF-101
appearance	White powder
30 me30 mesh residue %sh residue %	≤2.0≤2.0
Surface density g/cm³	0.45±0.10
Volatile matter %	≤1.50
Intrinsic viscosity	16.00±0.75

packaging and storage

This product is sealed in plastic bags and then externally packaged in polypropylene bags, each weighing 25±0.1kg.
Storage and Transportation
This product is stored in a dry and ventilated warehouse to prevent exposure to sunlight and moisture. Prevent pollution, sun exposure, rain and heat during transportation. This product is not a hazardous material.

Certifications