| Customization: | Available |
|---|---|
| CAS No.: | 64754-90-1 |
| Formula: | [CH2-Chcl-CH2-CH2]N |
|
Still deciding? Get samples of US$ 0/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
CPE-135AZ is a rubber-type chlorinated polyethylene, which has good impact resistance, flame retardancy, heat resistance and weather resistance; it can be widely used in ABS modification, etc. In addition, the fluidity of 135AZ is also the best, which can improve the problems of poor product fluidity, poor plasticization and poor processing performance.
Excellent processing performance
| Index | Unit | Testing Standard | CPE-135AZ |
| Exterior | -- | -- | White powder |
| Chlorine content | % | GB/T 7139 | 35.0±2.0 |
| Apparent density | g/cm3 | GB/T 1636-2008 | 0.50±0.10 |
| 30 mesh sieve residue | % | GB/T 2916 | ≤2.0 |
| Volatile matter | % | ASTM D5668 | ≤0.4 |
| Mooney viscosity | ML125ºC 1+4 | GB/T 1232.1-2000 | 35-45 |
| elongation at break | % | GB/T 528-2009 | ≥800 |
| Tensile Strength | MPa | GB/T 528-2009 | >8 |
| Shore hardness | SHORE A | GB/T 2411-2008 | ≤65 |
| Recipe |
Recipe1 |
Recipe2 |
Recipe3 |
| ABS | 100 | 100 | 100 |
| CPE-135AZ | / | 10 | 15 |
| Test indicators | Normal temperature impact strength | Low temperature impact strength | ||
| Specification | 1mmgap | 2mm injection molding | 1mm gap | 2mm injection molding |
| Recipe 1 | 19.82±0.68 | 24.88±2.92 | 12.88±0.76 | 16.50±1.07 |
| recipe 2 | 29.64±1.79 | 32.95±1.21 | 15.08±0.97 | 26.33±3.47 |
| Recipe 3 | 32.04±0.38 | 34.75±1.73 | 25.47±2.19 | 29.33±2.50 |
CPE-135AZ has excellent processing properties and good mechanical properties at low temperature, and can be used for ABS modification, etc.
25kg/bag, should be stored in a cool and dry environment, the shelf life is two years, and can still be used after passing the shelf life inspection.
){kind=link}