CPE Is Used to Improve The Rigidity and Toughness of PVC Products

• Customization: Available
• CAS No.: 63231-66-3
• Formula: -CH 2-Chcl-CH 2-CH 2-
• Model NO.: CPE-M/Y
• Certification: ISO9001
• Environmental Protection: Yes
• Color: White
• Kind: Plasticizer
• Appearance: Powder
• Transport Package: 25kg/Bag
• Specification: 25kg/bag
• Trademark: AXA
• Origin: China
• HS Code: 390190900
• Production Capacity: 3000 Mt a Month

Product Description

Product Description

CPE-M/Y is a new type of PVC modifier independently developed by our company. Compared with CPE, it can simultaneously improve the rigidity and toughness of PVC products, endowing them with higher tensile strength and hardness while ensuring good toughness of PVC.

Technical Indicators

Parameter	Company	Test Standard	CPE-Y	CPE-M
Product Appearance	--	--	White Powder	Reference Test Standard
Apparent Density	G/Cm3	GB/T 1636	0.5±0.1	≥0.30
Sieve Residue (30 Mesh)	%	GB/T 2916	≤2.0	≤2.0
Volatile Matter	%	ASTM D5668	≤1.5	≤1.5
Residual (750 ºC)	%	GB/T 7531	5.5±1.0	≤6.0
Elongation At Break	%	GB/T 528	1100±100	≥1600

Products Features

CPE-Y product advantages: 
1. Promote the plasticization of PVC mixture ;
2. Good elongation at break and toughness ; 
3. Improve the surface finish of the final product ;
4. Gives PVC products excellent strength and hardness, and significantly improves the compressive strength of the line pipe. 

CPE-M product advantages: 
1. Low consumption, 75% - 80% of pure material CPE; 
2. Obviously improve the toughness of the product; 
3. Promote the plasticization of PVC mixture; 
4. Excellent elongation at break and toughness; 
5. Improve the cost performance ratio of products.

Product application

CPE-M/Y is mainly used in the production of PVC outdoor products, such as PVC conduit, PVC drainage pipes, PVC door and window profiles, PVC buckle plates, and decorative panels.

1, CPE-Y is applicable to PVC hard products and molded products. It is almost crystal free and has excellent flame retardancy, electrical insulation, chemical resistance, oil resistance and water resistance; It has good compatibility with PVC, CR, NBR, etc. 
2, CPE-M is applicable to flame retardant of ABS products, wire and electric appliance shells, soft PVC foaming materials, special synthetic rubber, modifier of general synthetic rubber, plasticizer of PVC and other plastics.
 

Packaging and storage

25Kg/package or as required by customers. 
The product should be kept clean during transportation and handling, prevent sunshine, rain, high temperature and humidity, and avoid damage to packaging. It should be stored in a cool, dry, sunless warehouse with temperature below 40 C for two year. It can still be used after two year' performance test.