New Research and Development of Chlorinated Polyethylene with Increased Hardness

• Customization: Available
• CAS No.: 64754-90-1
• Formula: 64754-90-1
• Model NO.: CPE-Y/M
• Environmental Protection: Yes
• Color: White
• Kind: Plasticizer
• Appearance: Powder
• Company Proper: Manufacturer
• Mode of Transport: Sea Transportation
• Product Color: White Powder
• Sample: Yes
• Transport Package: 25kg/Bag
• Specification: 25kg/bag
• Trademark: AXA
• Origin: China
• HS Code: 39019090
• Production Capacity: 50000 Tons Per Year

Product Description

Product Introduction

CPE-Y/M is a new PVC modifier independently developed by the company. Compared with ordinary CPE, it can improve the hardness and toughness of PVC products at the same time. While ensuring good toughness of PVC, it gives products higher tensile strength and toughness. hardness.
 

 

Product advantages

CPE-Y
1. Promote the plasticization of PVC mixture
2. Good elongation at break and toughness
3. Improve the surface finish of the final product 
4. Give PVC products excellent strength and hardness, and significantly improve the compressive strength of the line pipe
CPE-M 
1 the amount of use is small, is between 75% and 80% of the amount of pure material CPE;
2. Significantly improve the toughness of the product;
3. Promote the plasticization of PVC mixture;
4. Excellent elongation at break and toughness;

The product has good extrusion fluidity after mixing with PVC, suitable for PVC rigid products and molded products, almost completely non-crystalline, and has excellent flame retardancy, electrical insulation, chemical resistance, oil resistance and water resistance ; It has good compatibility with PVC, CR, NBR, etc.

Technical index

Parameter	Company	Test Standard	CPE-Y	CPE-M
Product Appearance	--	--	White Powder	Reference Test Standard
Apparent Density	G/Cm3	GB/T 1636	0.5±0.1	≥0.30
Sieve Residue (30 Mesh)	%	GB/T 2916	≤2.0	≤2.0
Volatile Matter	%	ASTM D5668	≤1.5	≤1.5
Residual (750 ºC)	%	GB/T 7531	5.5±1.0	≤6.0
Elongation At Break	%	GB/T 528	1100±100	≥1600

Packaging and storage

25kg / package or according to the customer's requirements.
The products shall be kept clean during transportation and loading and unloading to prevent sun, rain, high temperature and humidity and damage to the packaging. It shall be stored in a cool, dry warehouse without direct sunlight and at a temperature lower than 40 ºC for two years. After two years, it can still be used after passing the performance inspection.

Our company is a professional manufacturer of CPE and CPVC flame retardants. At present, the company has a dedicated R&D center, advanced R&D equipment, and dozens of high-level engineers, constantly introducing new technologies, new processes, and new equipment. Committed to the development of new products, leading the development of the industry, ensuring the continuous stability and improvement of products, insisting on the research and development of CPE chemical products, and striving to become a leader in the CPE chemical industry. Moreover, the company cooperates extensively with internationally renowned companies in technology, adopts international advanced blending technology and equipment, and comprehensively practices the improvement and optimization of the quality system through the global procurement platform and technical support. The product quality is widely recognized by customers and consumers, and welcomes the global Customer inquiries and purchases.